Optex LX-402 Wired Wide Angle Outdoor Passive LX-402C
Pricing is shown to logged-in customers.
Description
The Optex LX-402 Wired Wide Angle Outdoor Passive is a versatile, short-range wired outdoor passive infrared (PIR) motion detector engineered for both residential and commercial perimeter security. Covering a broad 12 m x 15 m area across a 120° wide angle, this sensor integrates seamlessly with intrusion alarm panels, CCTV recording systems, and automated security floodlights.
Designed to handle harsh outdoor conditions, the LX-402C features an IP54 weatherproof housing and Optex’s patented Double Conductive Shielding, which blocks interference from direct sunlight, car headlights, and radio frequency noise. Installers can easily switch between standard volumetric Multi-Level detection and horizontal Pet Alley mode to prevent false alarms caused by dogs, cats, and small wildlife.
Key Features
Wide-Angle Perimeter Coverage. Monitors a 12 m x 15 m zone across 120° using 40 Multi-Level detection zones or 18 Pet Alley zones.
Selectable Pet Alley Mode. Adjusts the internal PCB and mirror to create a horizontal detection plane at 1.2 m to 1.5 m height, allowing pets to pass underneath undetected.
Double Conductive Shielding. Filters out intense sunlight, vehicle headlights, and RFI interference to drastically cut down false alarms.
Built-In Day & Night Sensor. Includes an adjustable photocell (10 to 100,000 lux) so you can configure the detector to operate 24 hours a day or only after dark.
Customisable Area Masking. Ships with area-masking strips that let you block off unwanted zones such as public walkways, roads, or moving foliage.
Installer-Friendly Setup. Equipped with dual wiring knockouts, a 3-position sensitivity switch (High, Medium, Low), and selectable pulse count (Test or 2) for quick commissioning.
Tamper & Weather Protection. Housed in an IP54-rated enclosure with a built-in normally closed (N.C.) cover tamper switch for reliable outdoor operation.
- Model Code
- LX-402C
- Detection Method
- Passive Infrared (PIR)
- Detection Coverage
- 12 m x 15 m (40 ft x 50 ft), 120° wide angle
- Detection Zones
- Multi-Level: 40 zones / Pet Alley: 18 zones
- Detectable Speed
- 0.3 m/s to 1.0 m/s
- Mounting Height
- Multi-Level: 2.5 m max / Pet Alley: 1.2 m – 1.5 m
- Sensitivity Selection
- 3-position switch (High / Middle / Low)
- Pulse Count
- Selectable: 2 (20 ± 5 sec) or TEST (1 pulse)
- Day / Night Mode
- Adjustable photocell (approx. 10 to 100,000 lux)
- Power Input
- 10.8 – 13.2 VDC
- Current Draw
- 25 mA max
- Alarm Output
- Form C relay (N.C. / N.O.), 28 VDC, 0.2 A max
- Alarm Period
- 2 ± 1 sec (delay timer)
- Tamper Switch
- N.C. (opens when front cover is removed)
- Warm-Up Period
- Approx. 60 seconds
- Operating Temperature
- -20°C to +50°C
- Relative Humidity
- 95% max
- Ingress Protection
- IP54 weatherproof
- Dimensions (H x W x D)
- 141 mm x 74.8 mm x 53.5 mm
- Weight
- 170 g
-
Can I use the Optex LX-402C if I have dogs in my yard? +
Yes. By mounting the detector at 1.2 m to 1.5 m and switching the internal mirror to Pet Alley mode, the sensor projects a horizontal beam above your pets while still detecting human intruders.
-
What is the difference between the LX-402 and the LX-402C? +
They refer to the same wide-angle 12 m x 15 m outdoor detector. The "C" suffix is commonly used by regional distributors (such as in South Africa) to designate the standard wide-angle SKU (862-01-LX-402C).
-
Can this sensor trigger outdoor lights or a CCTV DVR instead of an alarm panel? +
Yes. It features a Form C relay output (N.C. and N.O.) and a built-in Day/Night light sensor, allowing it to trigger security lighting at night, initiate CCTV recording, or connect directly to a wired alarm panel.
-
Does the unit include a wall or ceiling bracket? +
The LX-402C mounts flat to a wall out of the box. If you need to angle the sensor horizontally (±45°) or downward (0–20°), optional CA-1W (wall) and CA-2C (ceiling) swivel brackets are sold separately.
-
Will direct sunlight or car headlights trigger false alarms? +
No. The LX-402C uses Optex’s patented Double Conductive Shielding over the pyroelectric element to block visible light disturbances from strong sunlight and passing vehicle headlights.
No reviews yet. If you have used this one on a site, tell us how it went.
Details +
Description
The Optex LX-402 Wired Wide Angle Outdoor Passive is a versatile, short-range wired outdoor passive infrared (PIR) motion detector engineered for both residential and commercial perimeter security. Covering a broad 12 m x 15 m area across a 120° wide angle, this sensor integrates seamlessly with intrusion alarm panels, CCTV recording systems, and automated security floodlights.
Designed to handle harsh outdoor conditions, the LX-402C features an IP54 weatherproof housing and Optex’s patented Double Conductive Shielding, which blocks interference from direct sunlight, car headlights, and radio frequency noise. Installers can easily switch between standard volumetric Multi-Level detection and horizontal Pet Alley mode to prevent false alarms caused by dogs, cats, and small wildlife.
Key Features
Wide-Angle Perimeter Coverage. Monitors a 12 m x 15 m zone across 120° using 40 Multi-Level detection zones or 18 Pet Alley zones.
Selectable Pet Alley Mode. Adjusts the internal PCB and mirror to create a horizontal detection plane at 1.2 m to 1.5 m height, allowing pets to pass underneath undetected.
Double Conductive Shielding. Filters out intense sunlight, vehicle headlights, and RFI interference to drastically cut down false alarms.
Built-In Day & Night Sensor. Includes an adjustable photocell (10 to 100,000 lux) so you can configure the detector to operate 24 hours a day or only after dark.
Customisable Area Masking. Ships with area-masking strips that let you block off unwanted zones such as public walkways, roads, or moving foliage.
Installer-Friendly Setup. Equipped with dual wiring knockouts, a 3-position sensitivity switch (High, Medium, Low), and selectable pulse count (Test or 2) for quick commissioning.
Tamper & Weather Protection. Housed in an IP54-rated enclosure with a built-in normally closed (N.C.) cover tamper switch for reliable outdoor operation.
Specifications +
- Model Code
- LX-402C
- Detection Method
- Passive Infrared (PIR)
- Detection Coverage
- 12 m x 15 m (40 ft x 50 ft), 120° wide angle
- Detection Zones
- Multi-Level: 40 zones / Pet Alley: 18 zones
- Detectable Speed
- 0.3 m/s to 1.0 m/s
- Mounting Height
- Multi-Level: 2.5 m max / Pet Alley: 1.2 m – 1.5 m
- Sensitivity Selection
- 3-position switch (High / Middle / Low)
- Pulse Count
- Selectable: 2 (20 ± 5 sec) or TEST (1 pulse)
- Day / Night Mode
- Adjustable photocell (approx. 10 to 100,000 lux)
- Power Input
- 10.8 – 13.2 VDC
- Current Draw
- 25 mA max
- Alarm Output
- Form C relay (N.C. / N.O.), 28 VDC, 0.2 A max
- Alarm Period
- 2 ± 1 sec (delay timer)
- Tamper Switch
- N.C. (opens when front cover is removed)
- Warm-Up Period
- Approx. 60 seconds
- Operating Temperature
- -20°C to +50°C
- Relative Humidity
- 95% max
- Ingress Protection
- IP54 weatherproof
- Dimensions (H x W x D)
- 141 mm x 74.8 mm x 53.5 mm
- Weight
- 170 g
Downloads +
Questions +
-
Can I use the Optex LX-402C if I have dogs in my yard? +
Yes. By mounting the detector at 1.2 m to 1.5 m and switching the internal mirror to Pet Alley mode, the sensor projects a horizontal beam above your pets while still detecting human intruders.
-
What is the difference between the LX-402 and the LX-402C? +
They refer to the same wide-angle 12 m x 15 m outdoor detector. The "C" suffix is commonly used by regional distributors (such as in South Africa) to designate the standard wide-angle SKU (862-01-LX-402C).
-
Can this sensor trigger outdoor lights or a CCTV DVR instead of an alarm panel? +
Yes. It features a Form C relay output (N.C. and N.O.) and a built-in Day/Night light sensor, allowing it to trigger security lighting at night, initiate CCTV recording, or connect directly to a wired alarm panel.
-
Does the unit include a wall or ceiling bracket? +
The LX-402C mounts flat to a wall out of the box. If you need to angle the sensor horizontally (±45°) or downward (0–20°), optional CA-1W (wall) and CA-2C (ceiling) swivel brackets are sold separately.
-
Will direct sunlight or car headlights trigger false alarms? +
No. The LX-402C uses Optex’s patented Double Conductive Shielding over the pyroelectric element to block visible light disturbances from strong sunlight and passing vehicle headlights.
Reviews +
No reviews yet. If you have used this one on a site, tell us how it went.